PRETREATMENT CHEMICALS
-
DEGREASERS (Powder)
Our alkaline degrease powder is formulated to remove heavy coatings of oil, etc., normally encountered in fabrication of steel sheets.
Packing: 25kg/ bag
Pretreatment chemical Degreaser powder Process Dipping Content (%) 3 ~ 8 Temperature 0C 45 ~ 55 Time (Minute) 15 ~ 30 Read the complete instruction of metal pretreatment
-
ALKALINE DEGREASERS (Liquid)
Our liquid form Alkaline degreaser is specially formulated to effectively remove thin oil, grease etc. The product can be suitable with both dipping or spray method.
Packing: 25kg/can
Pretreatment chemical Alkaline degreaser Process Dipping or Spraying Content (%) 3 ~ 8 Temperature 0C 45 ~ 55 Time (Minute) 15 ~ 30 Read the complete instruction of metal pretreatment
-
ALUMINIUM DEGREASER
Aluminium is a kind of soft metal which has to be degreased properly. Strong alkalis will etch the surface and care should be taken to avoid it. Our Aluminium degreaser is specially designed to provide excellent clean result without leaving any effect on the pre-coat aluminium substrate.
Packing: 25kg/ can
Pretreatment chemical Aluminium degreaser Process Dipping or Spraying Content (%) 3 ~ 8 Temperature 0C 45 ~ 55 Time (Minute) 15 ~ 30 Read the complete instruction of metal pretreatment
-
RUST REMOVER (H2SO4)
The mixture of strong Acid Sulfuric help derusting all metal surface effectively. It does not produce fumes as a product of reaction between the chemical and the metal; but there will be slight smell, which can be sucked and blown away through hoods suitably placed above the pickling tank.
Packing: 40kg/ tank
Pretreated chemical Rust remover Process Dipping Content (%) 15 ~ 25 Temperature 0C Room temperature up to 50 Time (minute) 3 ~ 15 Read the complete instruction of metal pretreatment
-
SURFACE CONDITIONAL
Surface conditional help activating the substrate prior to phosphate process. It leads to a better result where a thin and homogenous phosphate layer can be obtained and finally, coating adhesion can be improved remarkably.
Pretreated chemical Surface conditional Process Dipping Content (%) 1.5kg per 1000 litre of water PH value 8 ~ 10 Control PH with Soda ash Read the complete instruction of metal pretreatment
-
ZINC PHOSPHATE
Zinc Phosphate creates a primer layer on the metal substrate before the coating is applied. The layer provides anti-rust, anti corrosion property as well as improving the adhesion of the coating itself. Zinc phophate is widely used in Powder coating pretreatment process as it is cost effective and easy to apply.
Packing: 25kg/can
-
ACCELERATOR
The accelerator is used for shortening the phosphating process. The concentration of the accelerator will be easily decreasing, thus, the additional content must be filled to remain the best effect.
Packing: 20kg/ can